Scan ll™ Motion Sensors

Security

• Adjustable relay latch time from 0.5 to 64 seconds
• Field-selectable fail safe/fail secure
• Included pattern masking kit snaps in place to narrow scan field and help prevent unwanted activations
• Activation LED is visible at a distance and can be configured to OFF as needed

Application

• Intended for indoor use only
• Wall or ceiling mounted with lock-in-place angle adjustment
• UL294 and ULC-S319, Class 1 listed by manufacturer

Design

• High-impact ABS plastic enclosure and internal electronics can endure temperatures of -20° to 120°F
• Inconspicuous unit is only 1.5" x 6.25" x 1.5" in either black or white

Models

• Scan II-B: black with externally visible activation LED
• Scan II-W: white with externally visible activation LED

Power requirements

• 12/24 VDC: 35 mA @ 12 VDC; 38 mA @ 24 VDC when activated
• 12/24 VAC: 42 mA @ 12 VAC; 48 mA @ 24 VAC when activated
• 38 mAh required for standby operation (no internal standby battery)

Relay

• Two form "C" relay contacts rated 2.0 Amp @ 30 VDC or VAC maximum for DC resistive loads

Installation options

• Adjustable relay latch time from 0.5 to 64 seconds
• Relay mode can be programmed to reset when timer expires or remain activated until motion stops
• Field-selectable fail safe/fail secure
• Mounting height of 7 to 15 feet (indoors only)
• Lock-in-place pattern adjustment is +/- 14° with separate settings for wall vs. ceiling application

Operating temperatures

• Intended for indoor use only
• High-impact ABS plastic enclosure and internal electronics can endure temperatures of -20° to 120°F

Additional information

• Refer to the Scan II data sheet

• UL294 and ULC-S319, Class 1 listed by manufacturer

Category information

• Electronic Access Control catalog

Product information

• Scan ll data sheet

Technical resources

• Scan ll Installation instructions